As the panel shows actually used length (height) when it is hung down, required length can be cut correctly regardless to the cloth materials.Hang the curtain panel by clamping the lower seam to a horizontal level table bar, and input the required length via LCD(liquid crystal panel) touchscreen, then push the start button.The level bar stops at the set height.The operation process, "what to do next" is shown on the large-scaled LCD panel touchscreen, and makes it easy for the operater to use. In the case of a trouble it shows the way to recover from it.
Curtain Cutting Machine Automatic measuring and cutting machine for curtain cloth. The length of the curtain cloth is measured as it is drawn out, without changing the shape of the cloth as it gives no excessive tensions. Required cutting length and number of the sheets are easily input via LCD (liquid crystal panel) touchscreen. The cut sheets are hung and piled up over the front bar, it helps you to feed cut sheets to the following process.
All operations (setting of the cloth, inputting of cutting length, measuring, and cutting)can be done at in front of the machine. The operater does not need to move before and behind the machine.The cut sheets are hung and piled up over the front bar, it helps you to feed cut sheets to the following process.The operation process, 'what to do next' is shown on the large-scaled LCD (liquid crystal display panel) touchscreen. And makes it easy for the operater to use. In the case of a trouble it shows the way to recover from it.The material cloth can be used usefully by adopting the optional 'Middle cutting device'.
Heat-wire Cutting Machine Cutting machine for voile-fabrics. The section does not be frayed. Set voile-fabrics on the machine and push the start switch. Compact size-width 45 cm! You can install machine at narrow space.
Cutting machine for voile-fabrics. Machine cuts voile-fabrics straightly by a Nichrome wire. The cut-surface does not become frayed. Machine controls temperature of wire, so the voile-fabrics are not scorched. Operator has to press start-buttons with both hands, and not burn one’s hands by heat-wire.
Manufacturer:
KYOKUTO SANKI CO.,LTD.
190, Higai, Tatsuno-cho, Tatsuno-city,
Hyogo-prf, 679-4195, Japan
Tel : +81-791-62-1771
Fax : +81-791-63-3335
E-mail : info@kyokuto-sanki.co.jp
1 comments:
Hey fantastic blog i m searching about this topic and i found your blog its really very helpful keep the good work thanks
cotton yarn from Pakistan
cotton carded yarn exporter in Pakistan
Post a Comment